Technical features of AT-2000W raise boring machine
AT-2000W raise drilling rig has the highest level of similar domestic products:
This drilling rig has full hydraulic drive technology, large torque, stepless speed regulation for drilling, compact structure, small size, easy disassembly and assembly, simple and convenient transportation and installation, and good impact resistance.
It has the characteristics of reliable operation; compared with other ordinary rock drilling methods, the raise drilling rig has high production efficiency, good well quality, safe operation and small drilling deflection rate. Drilling is smooth, excavation speed is fast, and well efficiency is high.
Its newly designed manipulator has reasonable design and stable and reliable movement, which greatly reduces the labor intensity of workers.
The newly designed hydraulic system uses advanced hydraulic components at home and abroad to simplify the hydraulic pipeline structure. The overflow-free design reduces system heat and improves the stability of the hydraulic system.
Application of AT-2000W raise boring machine
It is mainly used in rock formations of underground mines and other projects to drill 250mm pilot holes in the forward direction and expand 2000mm ventilation shafts, filling wells or pipe wells in the reverse direction. It can also be used as an underground excavation for large-section sky shafts and slide shafts in mines. The drilling depth is 300 meters, and the drilling inclination angle is 60°~90°.
Application scope of AT-2000W remote control raise boring machine
The altitude of the place of use does not exceed 3,000 meters. When operating in a plateau environment with an altitude exceeding 3,000 meters, appropriate handling measures should be taken.
The ambient temperature is -10℃~+40℃, and the maximum relative humidity is below 90% (when the temperature is 25℃). When exceeding the above range, appropriate measures must be taken.
The power supply voltage limit deviation is ±5%; the AC frequency limit deviation is ±1%.
| Parts | Parameters | unit | AT-2000W | ||
| Machine
|
Ratedspeed | r/min | Expansion：0-15
Guide hole：0-30 |
||
| Rated torque | KN.m | Expansion：≥75
Guide hole：≥38 |
|||
| Drilling thrust | KN | ≥600 | |||
| Reaming tension | KN | ≥1200 | |||
| Reaming diameter | mm | 250 | |||
| Reaming diameter | mm | 2000 | |||
| Drilling Angle | o | 60~90 | |||
|
ine |
Drilling depth | m | 300 | ||
| Walking size(L*W*H) | mm | 2617×980×1798(Non-removable rail height) | |||
|
Workingsize(L*W*H) |
mm | 5348×2106×2617 | |||
| noise | dB | ≤85 | |||
| Quality | kg | 8.8 | |||
| Reducer oil quantity | L | 20 | |||
| Skew rate | % | 1.0 | |||
| Pump
|
Rated pressure | Mpa | Main pump：35
Auxiliary pump：35 |
||
| Rated flow | L/min | Main pump：190
Auxiliary pump：75 |
|||
| Motor rating | KW | 110 | |||
| Rated voltage | V | 380/660 optional | |||
| Effective volume of fuel tank | L | 1000 | |||
| Overall dimension | mm | 2270×980×1500 | |||
| Quality | kg | 2850 | |||
| Hydraulic system cooling mode | Non-circulating fresh water cooling | ||||
| Remote control box
|
Remote control box size(L*W*H) | mm | 620×420×900 | ||
| Mass | kg | 2.5 | |||
| Control mode | frequency control | ||||
| Rated voltage | 433MHz | ||||
