You are here:

Customized Sub Saver for Vermeer HDD machine

Whatsapp: 0086 18274950733

Request a quote now

Answer any question about the products for you.

Features and Specs

Customized Sub Saver for Vermeer HDD machine, Vermeer sub savers are made of high-alloy steel for unmatched durability. Like the Vermeer Firestick, our sub savers each go through a 100% thread inspection so they’re ready when you are.

Model	lenght without thread	Drill rod diameter	Outer diameter	Thread
D7x11A,D10x14, D10x15	5.83″ (14.8 cm )	1.66″ (4.2 cm )	4.8cm	#200
D6x6—D10x15 S3	8″ (20.3 cm )	1.66″ (4.2 cm )	4.8cm	#200
D16x20—D20x22	4″ (10.2 cm )	1.9″ (4.8 cm )	5.4cm	#250
D18x22, D20x22	6.5″ (16.5 cm )	2.06″ (5.2 cm )	5.7cm	#400
D16x20 Series II, D20x22 S3	10.14″ (25.8 cm )	1.9″ (4.8cm )	5.4cm	#250
D20x22FX Series II	10.14″ (25.8 cm )	2.06″ (5.2 cm )	5.7cm	#400
D20x22 Series II, D20x22 S3, D23x30 S3	10.14″ (25.8 cm )	2.06″ (5.2 cm )	5.7cm	#400
D23x30 S3	10.14″ (25.8 cm )	2.375″ (6 cm )	6.67cm	#600
D24x40A (SN 001—382)	5.5″ (14 cm )	2.375″ (6 cm )	6.67cm	#600
D24x40A (SN 383 and above)	7″ (17.8 cm )	2.375″ (6 cm )	6.67cm	#600
D24x40 Series II	9.5″ (24.1 cm )	2.375″ (6 cm )	6.67cm	#600
D24x40 S3	10″ (25.4 cm )	2.375″ (6 cm )	6.67cm	#600
D36x50 Series II	7.92″ (20.1 cm )	2.375″ (6 cm )	7cm	#650
D36x50, D36x50 Series II	8.5″ (21.6 cm )	2.625″ (6.7 cm )	7.9cm	#700
D40x55 S3	8.92″ (22.7 cm )	2.375″ (6 cm )	7cm	#650
D40x55 S3	9.50″ (24.1 cm )	2.625″ (6.7 cm )	7.9cm	#700
D50x100A—for Drive Chuck 296355366	5.82″ (14.8 cm )	2.875″ (7.3 cm )	8.255cm	#900
D50x100A, D60x90, D60x90 S3, D80x100—for Drive Chucks 296255475, 296268832	7.02″ (17.8 cm )	3.5″ ( 8.9cm )	9.2cm	#800
D60x90, D60x90 S3—for Drive Chucks 296357202, 296257222	8.7″ (22 cm )	2.875″ (7.3 cm )	8.255cm	#900
D100x120 Series II, D100x140, D100x140 S3—for Drive Chucks 296309516, 296309602	7.02″ (17.8 cm )	3.5″ ( 8.9cm )	11.1cm	#1000
D100x120 FS2	7.02″ (17.8 cm )	3.5″ ( 8.9cm )	11.1cm	FS2